Menu principale:
DVB-
The LMTD-
Basic configuration provides one ASI input, but several internal options allow other input choices:
ASI
DVB-
DVB-
A common interface module to decode encrypted transport streams can be activated on the main input (ASI, DVB-
Further, enhanced hardware/software options allow advanced signal elaborations, like:
Remultiplexing and LCN management (MFN only)
TS multiplexing (MFN only)
SFN adapter
Internal Rx GPS module
The equipment is managed with a bundle software through an USB or LAN port.
An HTTP server is available on the LAN interface, to allow a local or remote management by means of a browser interface through an IP connection.
The transmitter comes with 8 on/off type telecontrol signals (4 opto-
Technical specifications :
General specifications:
Standard : DVB-T
Band : 474/858 MHz
Cooling : Forced air
Power supply : 230 Vac ± 15%, 47 / 63 Hz
Power consumption : Max 100 W
Protection: Over power, ROS, Over temperature
Dimensions : 483mm(W) x 500mm(L) x 44mm(H)
Weight : 4,5 Kg
Working temperature : -5 ÷+45 °C
Working humidity : Max 90% not condensed
Input specifications:
Input signal : MPEG-2 T.S. ASI format
Input level : 800 mV (±10%)
Data Rate : 270 MB/s
Data rate error : ±3ppm
Input connector: Female BNC
Input impedance : 75 Ω
Modulation specifications:
Modulation : OFDM
Carrier modulation : QPSK, 16 QAM, 64 QAM
IFFT : 2k and 8k
Guard interval : 1/4, 1/8, 1/16, 1/32
Code Rate : 1/2, 2/3, 3/4, 5/6, 7/8
Modulation bandwidth: 5MHz, 6MHz, 7MHz, 8MHz
Test functions : CW mode and null-packets Stream
Null-packet deletion : Integrated
PID filtering: Integrated
PCR restamping : Integrated
Output specifications:
Output power : Max 5W rms adjustable
BER : 0 after 6 h measurement
MER : typical > 40 dB
Output impedance : 50 Ω
Output connector : female N